|
|
|
|
|
|
|
|
|
|
|
|
|
|
NEW SKYJACK BACKUP ALARM 170620 International Orders require calculated shipping. Please contact us at 1(501)-366-1640 for estimates of shipping charges to your specific location. We ship worldwide. Forms of payment accepted: All major credit cards and Paypal!
|
Aftermarket Skyjack 153335 Coil 24V. Restore reliable electrical control to your Skyjack aerial lift's hydraulic valves with this direct-fit replacement 24-volt solenoid coil. Engineered to exact OEM specifications, this electrical component ensures precise fluid routing and consistent operation for your scissor lift in demanding industrial environments.
**SHIPPING:** This item ships FREE.
TECHNICAL SPECIFICATIONS & FITMENT - Replaces OEM Part Number: 153335 (Also replaces SJ-153335, SJ153335) - Component Type: Coil 24V (Non-Assembly) - Voltage: 24V - Compatibility: Fits select Skyjack scissor lift models including the SJ 3220, SJ 3226, SJ 4620, SJ 4626, SJ 4632, SJIII 3215, SJIII 3219, SJIII 3220, SJIII 3226, SJIII 4620, SJIII 4626, and SJIII 4632. Please verify your exact OEM part number before ordering.
**RETURN POLICY: NON-RETURNABLE.** Due to the sensitive nature of industrial electronic components, this item is final sale and cannot be returned. Please verify correct machine fitment prior to purchase.
|
Aftermarket Skyjack 194729 Emergency Switch Assembly. Ensure strict OSHA compliance and critical operator safety with this direct-fit replacement emergency stop switch assembly. Engineered specifically for Skyjack aerial work platforms, this heavy-duty electrical interlock switch is built to exact OEM specifications to instantly cut power during an emergency, maintaining a safe working environment on the job site.
**SHIPPING:** This item ships FREE.
TECHNICAL SPECIFICATIONS & FITMENT - Replaces OEM Part Number: 194729 (Also replaces SJ194729) - Component Type: Emergency Stop Switch Assembly - Compatibility: Fits select Skyjack scissor lifts and boom lifts. Please verify your exact OEM part number before ordering.
**RETURN POLICY: NON-RETURNABLE.** Due to the critical nature of industrial electronic safety interlocks, this item is final sale and cannot be returned. Please verify fitment prior to purchase.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Restore precise proportional control, eliminate intermittent electrical shorts, and ensure your aerial lift operates with maximum safety with this premium Replacement Control Cable Assembly (Part # 129670). Engineered specifically for heavy-duty Skyjack scissor lifts and aerial work platforms, this 37-inch high-performance electrical wiring harness ensures perfectly calibrated voltage transmission from your platform control box to the lower unit, guaranteeing smooth drive, lift, and steering functions during continuous-duty job site operations.
A pinched, internally frayed, or weather-damaged control cable compromises your machine's operational reliability, leading to total loss of platform functions, severe electrical arcing, and immediate safety tag-outs on the construction site. Our aftermarket Skyjack control cable assemblies are precision-manufactured featuring heavy-duty copper wiring, weatherproof multi-pin connectors, and a highly durable synthetic outer jacket designed to withstand extreme mechanical flexing and harsh industrial environments. We offer transparent pricing with fast, fully insured, FREE shipping directly to your repair facility.
TECHNICAL SPECIFICATIONS & VERIFIED FITMENT: • Part Number: 129670 (Replaces SJ129670, SJ-129670) • Component: Heavy Duty Proportional Control Box Wiring Harness / Cable Assembly (37-Inch) • Equipment Fitment: Engineered for select Skyjack Aerial Lifts and Scissor Lifts. Please verify your specific machine's electrical schematic and cable routing length prior to ordering.
Expert Tip: When replacing a major control cable assembly, it is strictly required to thoroughly inspect the receiving pin connectors on both the upper platform control box and the lower base module for signs of corrosion or bent pins. Always secure the new cable with proper zip-ties to prevent it from getting crushed in the scissor assembly during lowering!
|
Restore critical OSHA safety compliance and ensure reliable platform operation on your Skyjack aerial equipment with this premium Replacement Tilt Level Sensor (Part # 117880). Engineered specifically for heavy-duty Skyjack aerial work platforms, this highly sensitive dual-axis electrical sensor is manufactured to withstand rigorous daily use, extreme elevation angles, and continuous exposure in harsh construction environments.
A damaged, miscalibrated, or failing tilt sensor will cause severe safety lockouts, false alarms, and complete immobilization of your boom or scissor lift. This brand-new aftermarket sensor (NO core charge required) features heavy-duty internal circuitry and precision 2.5/4.5 degree cutoffs to perfectly replicate OEM safety standards and operational efficiency. We offer transparent pricing with fast, fully insured, FREE shipping directly to your maintenance facility.
TECHNICAL SPECIFICATIONS & VERIFIED FITMENT:
• Part Number: 117880 (Direct Replacement for SJ117880) • Component Category: Aerial Lift / Electrical / Tilt Level Sensor • Specifications: Dual Axis N.C. | 2.5 / 4.5 Degree | 2S Delay | 24V • Condition: Brand New (Not Rebuilt / No Core Required) • Terms: This is a Non-Returnable item. • Equipment Fitment: Precision engineered for select Skyjack Aerial Lifts (Applicable for Serial Numbers from 82000 to 80000113). Please verify your specific machine's serial number and electrical manual prior to ordering.
Expert Tip: Before condemning your tilt level sensor, thoroughly inspect the mounting plate for any physical damage or bending. The sensor must be perfectly leveled to the machine's chassis; even a slightly bent bracket will trigger false platform lockouts and mimic a dead sensor!
|
NEW SKYJACK END YOKE INPUT 1310 SERIES 136452 International Orders require calculated shipping. Please contact us at 1(501)-366-1640 for estimates of shipping charges to your specific location. We ship worldwide. Forms of payment accepted: All major credit cards and Paypal!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium aftermarket Skyjack 127187 Engine Starter. Restore reliable ignition and starting power to your Skyjack aerial lift with this heavy-duty, direct-replacement starter motor. Built to exact OEM specifications to withstand the high torque and continuous cranking demands of rigorous job site environments.
**SHIPPING:** This item ships FREE.
TECHNICAL SPECIFICATIONS & FITMENT - Replaces OEM Part Number: 127187 - Component Type: Engine Starter Motor - Build: Premium Heavy-Duty OEM Spec - Compatibility: Fits select Skyjack boom lifts and aerial platforms equipped with Deutz Diesel engines (including SJ40/4). Please verify your exact OEM part number and engine configuration before ordering.
**RETURN POLICY:** Please note that all electrical engine components, including starters, are STRICTLY NON-RETURNABLE to prevent installation damage disputes. Ensure correct fitment and properly diagnose your ignition system prior to purchase.
|
Premium aftermarket Skyjack 169260 24 Volt DC Pump Motor. Restore maximum lifting power and reliable hydraulic pressure to your Skyjack aerial lift with this heavy-duty, direct-replacement electric pump motor. Built to exact OEM specifications, featuring high-grade copper windings and heavy-duty brushes to withstand continuous cycle demands in rigorous job site environments.
**SHIPPING:** This item ships FREE.
TECHNICAL SPECIFICATIONS & FITMENT - Replaces OEM Part Number: 169260 (SJ169260) - Component Type: 24 Volt DC Electric Hydraulic Pump Motor - Build: Premium Heavy-Duty OEM Spec - Compatibility: Fits select Skyjack scissor lifts and boom lifts. Please verify your exact OEM part number, voltage requirements, and hydraulic pump mounting flange before ordering.
**RETURN POLICY:** Please note that all electrical components, including DC motors, are STRICTLY NON-RETURNABLE to prevent installation damage disputes. Ensure correct fitment and properly diagnose your hydraulic/electrical system prior to purchase.
|
NEW SKYJACK CHARGER BATTERY 48VDC SIGNE 129685 International Orders require calculated shipping. Please contact us at 1(501)-366-1640 for estimates of shipping charges to your specific location. We ship worldwide. Forms of payment accepted: All major credit cards and Paypal!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium aftermarket Nylon Cable Track Hose Carrier for Skyjack aerial lifts. Direct replacement for OEM part number SJ1180340. Heavy-duty 217.87 inch impact-resistant nylon assembly. Free Shipping.
|
Premium aftermarket Nylon Cable Track Hose Carrier for Skyjack aerial lifts. Direct replacement for OEM part number SJ1180340. Heavy-duty 217.87 inch impact-resistant nylon assembly. Free Shipping.
|
Premium aftermarket Skyjack 115914 Precision Governor Speed Controller. Restore flawless drive functionality and safe operational speeds to your aerial lift with this heavy-duty, direct-replacement electronic controller. Built to exact OEM specifications for maximum reliability.
**SHIPPING:** This item ships FREE.
TECHNICAL SPECIFICATIONS & FITMENT - Replaces OEM Part Number: 115914 - Component Type: Precision Governor / Speed Controller - Compatibility: Fits select Skyjack aerial lifts and work platforms. Please verify your exact OEM part number, serial number, and electrical harness connections before ordering.
**RETURN POLICY:** Please note that all high-value electrical components, including speed controllers and governors, are STRICTLY NON-RETURNABLE to prevent installation damage disputes. Ensure correct fitment and properly diagnose your lift's electrical system prior to purchase.
|
|
|
