Restore proper spark delivery, eliminate engine misfires, and improve the fuel efficiency of your Daewoo or Doosan forklift with this premium Replacement Ignition Coil Wire Set (Part # A403886). Engineered for high-heat industrial engine environments, this complete spark plug wire set features heavy-duty insulation to prevent voltage leaks and cross-firing during heavy daily operation.

Worn, cracked, or degraded ignition wires cause rough idling, stalling under load, and unburnt fuel entering your exhaust system. Don't pay over $120 at the specialty dealers or wait on backordered parts. Our high-quality replacement set provides the exact same factory-level voltage transfer and durability. We offer FAST, FREE SHIPPING across the USA to get your forklift running smoothly and safely back on the warehouse floor.

TECHNICAL SPECIFICATIONS & VERIFIED FITMENT:

• Part Number: A403886 (Replaces DWA403886)

• Component Type: Ignition Coil / Spark Plug Wire Set

• Equipment Fitment: Verified compatible with select Daewoo and Doosan gas/LP forklift models

• Fit & Finish: Exact length and heavy-duty insulated boots for a direct-fit installation

⚠️ RETURN POLICY NOTE: Due to the sensitive nature of electrical and ignition components, all returned electrical parts are subject to a mandatory 25% restocking fee. Please verify your part number and engine compatibility prior to purchase.

Expert Tip: When replacing your ignition wires, it is highly recommended to inspect and replace your spark plugs at the same time. Installing brand-new wires onto old, fouled spark plugs will prevent you from getting the full performance benefit of this replacement.

Restore immediate column or cab support, eliminate dangerous dropping, and ensure operator safety on your Daewoo forklift with this premium Replacement Gas Spring With Locking Device (Part # 400315-00075). Engineered specifically for heavy-duty Daewoo/Doosan material handling equipment, this high-performance gas strut features an integrated locking mechanism manufactured to withstand rigorous daily use, intense warehouse vibration, and constant mechanical cycling.

A blown, leaking, or depressurized gas spring will fail to hold weight, causing heavy components to slam down unexpectedly and creating severe OSHA safety hazards. This brand-new aftermarket gas spring (NO core charge required) features a heavy-duty polished rod, premium internal pressure seals, and a secure mechanical lock to perfectly replicate OEM lifting force and durability. We offer transparent pricing with fast, fully insured, FREE shipping directly to your maintenance facility.

TECHNICAL SPECIFICATIONS & VERIFIED FITMENT:

• Part Number: 400315-00075 (Direct Replacement for DW400315-00075)

• Component Category: Cab & Frame / Hoods & Columns / Gas Spring

• Features: Integrated Mechanical Locking Device

• Condition: Brand New (Not Rebuilt / No Core Required)

• Terms: Returnable within 7 days if unopened in original packaging. Please see our returns page for full details.

• Equipment Fitment: Precision engineered for select Daewoo/Doosan Forklifts. Please verify your specific machine's serial number and structural schematic prior to ordering.

Expert Tip: When installing a new gas spring, never use locking pliers or grips on the polished shaft during installation! Even a microscopic scratch on the rod will instantly tear the internal pressurized seal the very first time the spring compresses, causing it to leak out and fail immediately.

Restore proper fuel pressure and eliminate dangerous engine stalling on your material handling equipment with this premium Replacement Fuel Pump (Part # D490709). Engineered specifically for Daewoo and Doosan industrial forklifts, this heavy-duty mechanical fuel delivery pump ensures your engine receives the exact fuel volume required under heavy warehouse operating conditions and maximum payloads.

A failing, clogged, or leaking fuel pump will cause your forklift to hard-start, sputter, or completely stall out in the middle of a lift, creating a massive safety hazard on the dock. Don't pay outrageous $290+ markups at the big liquidators or deal with surprise shipping fees on heavy engine components at checkout. Our aftermarket fuel pumps are manufactured to exact OEM tolerances for a fast, direct drop-in installation, getting your equipment running smoothly again. We offer FAST, FREE SHIPPING across the USA.

TECHNICAL SPECIFICATIONS & VERIFIED FITMENT:

• Part Number: D490709 (Replaces Daewoo / Doosan D490709, DWD490709)

• Component Type: Engine Fuel Delivery Pump

• Fitment: Verified compatible with a wide range of Daewoo and Doosan internal combustion lift trucks (including G15S series and compatible models).

Expert Tip: When replacing a failing fuel pump, always inspect and replace your inline fuel filters and fuel lines at the same time! A clogged filter is often the root cause of fuel pump failure, and running a brand-new pump through a dirty filter will quickly burn out the new unit.

Restore proper engine cooling and prevent catastrophic overheating with this premium Replacement Water Pump Housing (Part # 7E6797). Engineered specifically for Daewoo and Doosan material handling equipment equipped with the Hercules 2.7L engine, this heavy-duty cast-iron housing provides a perfectly machined mounting surface for your water pump, ensuring a leak-free seal and maximum coolant flow through the engine block.

A cracked, corroded, or warped water pump housing compromises your forklift's cooling system, leading to severe coolant leaks, loss of hydraulic pressure, and immediate engine failure. Our aftermarket Doosan / Daewoo water pump housings are precision-machined to exact OEM tolerances, offering long-lasting durability and a factory-level fit even in high-temperature, continuous-duty industrial environments. We offer transparent pricing with fast, fully insured, FREE shipping directly to your repair facility.

TECHNICAL SPECIFICATIONS & VERIFIED FITMENT:

• Part Number: 7E6797 (Replaces DW7E6797, CT7E6797, and compatible Caterpillar / Mitsubishi crossovers)

• Component: Heavy Duty Engine Water Pump Housing

• Engine Fitment: Hercules 2.7 Liter

• Equipment Fitment: Engineered for select Daewoo and Doosan Forklifts (Including popular G30S-2 models). Please verify your specific machine's engine parts manual for exact fitment.

*Important Note: Due to the specialized, heavy-duty cast nature of this engine component, this is a strict non-returnable item. Please verify your exact part number and engine model prior to ordering.*

Restore safe, quiet operation and proper engine backpressure to your warehouse fleet with this premium Replacement Muffler Assembly (Part # A213629). Engineered to meet or exceed original equipment specifications, this heavy-duty exhaust component is manufactured from industrial-grade aluminized steel to withstand the intense heat, corrosion, and daily vibration of heavy material handling.

A rusted, cracked, or blown-out muffler doesn't just create deafening noise on the warehouse floor; it disrupts engine fuel economy and vents dangerous exhaust fumes directly into your operator's breathing zone. Don't risk an OSHA violation or pay massive dealer markups. Our high-quality replacement provides the exact same sound dampening and exhaust flow as the factory unit. We offer FAST, FREE SHIPPING across the USA to get your Daewoo or Doosan lift safely back to work.

TECHNICAL SPECIFICATIONS & VERIFIED FITMENT:

• Part Number: A213629 (Replaces DWA213629)

• Component Type: Forklift Exhaust Muffler Assembly

• Equipment Fitment: Verified compatible with Daewoo and Doosan G25S-3 and G30S-3 models

• Construction: Welded seams for extreme thermal fatigue resistance

• Installation: Direct bolt-on replacement to factory exhaust pipes and mounting brackets

Expert Tip: When replacing your muffler, it is highly recommended to inspect and replace your exhaust pipe gaskets and rubber mounting hangers. Reusing stretched hangers or heat-cycled gaskets often leads to immediate exhaust leaks and vibration damage on your brand-new muffler.